CredibilityFactor
Equivalency of input parameters
https://uofa.net/nagaraja/cou1/factor/equivalency-of-input-parameters
Described in
packs/vv40/examples/nagaraja/cou1/uofa-nagaraja-cou1.jsonld
Fields
@type |
CredibilityFactor |
uofa:factorType |
Equivalency of input parameters |
uofa:requiredLevel |
3 |
uofa:achievedLevel |
3 |
uofa:factorStatus |
assessed |
uofa:acceptanceCriteria |
Goal (c): types and ranges of all inputs (material properties, geometry, boundary conditions, contact) equivalent between FEA model and experimental setup. [Nagaraja Table 1] |
uofa:rationale |
FEA inputs match experimental measurements: ASTM E8 stress-strain curve for Ti-6Al-4V, measured construct geometry from CAD, F1717-prescribed boundary conditions and loading rate. |
uofa:factorStandard |
ASME-VV40-2018 |
Referenced by
Which records point at this identifier, and through which property. This relationship is not written down anywhere in the packages themselves; it is derived by indexing the whole corpus.
| Record | Property | Source |
|---|---|---|
https://uofa.net/nagaraja/cou1 |
uofa:hasCredibilityFactor |
uofa-nagaraja-cou1.jsonld |